Classificar uma lista de números [fechado]


25

Sobre o Code-Bowling:

No golfe, você tenta obter a pontuação mais baixa (menor aplicação, mais elegante, etc.). No boliche, você tenta obter a pontuação mais alta. Portanto, se você seguir, o objetivo de um desafio do Code-Bowling é tornar o maior, mais bastardo e mais difícil de manter, um pedaço de código que ainda atenda aos requisitos do desafio. No entanto, não faz sentido tornar a fonte mais longa apenas por isso. Parece que o comprimento adicionado foi do design e não apenas do preenchimento.

O desafio:

Crie um programa que classifique uma lista de números em ordem crescente.

Exemplo:

Entrada: 1, 4, 7, 2, 5

Saída: 1, 2, 4, 5, 7

Código: Obviamente, isso não seria uma boa resposta, pois não há muitos WTFs lá

function doSort(array $input) {
    sort($input);
    return $input;
}

Regras:

Não existem regras reais. Contanto que o programa funcione, tenha isso!

Lembre-se: isso é boliche de código, não golfe. O objetivo é criar o pior e mais bastardo código possível! Pontos de bônus por código que parece bom, mas na verdade é enganosamente ruim ...


Eu desejo que eu ainda tinha o código fila calendário eu escrevi uma vez ...
Peter Taylor

14
sort(sort(sort(sort(sort(sort(myarray))))))Garante uma classificação perfeita!
Mateen Ulhaq

Respostas:


21

Classificação por entrada do usuário. O que pode ser pior?

function sort(array) {
    newArray = new Array
    notSorted = true;
    while (notSorted) {
        sortfail = false;
        i = -1
        for (;;) {
            if ((++i + 1) == array.length) break;
            if (confirm("is " + array[i] + " less than " + array[i + 1])) {
                newArray[i] = array[i]
                newArray[i + 1] = array[i + 1]
            } else {
                newArray[i] = array[i + 1]
                newArray[i + 1] = array[i]
                array[i] = newArray[i]
                array[i + 1] = newArray[i + 1]
                sortfail = true
            }
        }
        array = newArray;
        if (!sortfail) notSorted = false
    }
    return array
}

console.log(sort([2,1,3]))

Ver exemplo ao vivo


Você pode fazer melhor que isso ... :-D
ircmaxell

Melhor e ainda classificar corretamente? Isso é uma dor. Isso é algoritmicamente horrível. Não preciso tornar o código muito mais horrível.
Raynos

5
A entrada do usuário geralmente está errada. Os usuários podem estar bêbados ou chapados, e também pode haver adversários que lhe dão a ordem errada de propósito. Você deve embaralhar aleatoriamente e perguntar novamente até ter um número razoável de respostas para o mesmo emparelhamento.
Paul

@Paul, a falta de defesa na entrada do usuário é uma das principais vantagens deste código bowl. Eu acho que ter uma validação completamente inútil na entrada do usuário seria melhor do que nenhuma.
Raynos

não tenho certeza sobre o elemento manual disso.
Steve Robbins

16
class Array
  def sort
    self.permutation.min
  end
end

Ah, a elegância de Ruby ... a auto-satisfação resulta em um enumerador. Nenhum dano feito ainda. O .min de aparência inocente, porém, suga esse enumerador em uma matriz. O tamanho dessa matriz explode quando o número de elementos aumenta. Sem mencionar que isso arruina um bom tipo pré-existente.


2
É boliche de código, se você nunca viu isso antes - você deve escrever o código mais longo ! ;)
nyuszika7h

3
Eu estou indo para a 'boa aparência, mas mal enganosamente' bônus :)
steenslag

3
Eu diria que isso parece perfeitamente bem para qualquer programador SQL. Agora, o compilador só precisa entender que o que você queria era apenas uma espécie simples.
Aaaaaaaaaaaa

15

Bogosort!

import random

def is_sorted(seq):
    for x, y in zip(seq[:-1], seq[1:]):
        if x > y:
            return False
    return True

def sort(seq):
    while not is_sorted(seq):
        random.shuffle(seq)

Droga você chegou antes de mim ...
arrdem

Isto é bogosort
Caridorc

Eficiência:O(2n random)
Veja

12

Perl Bubble Sort

push(@m,'0');$a=<>;push(@m,$a);
$a=pop@m;push(@c,$a);
push(@m,'p');$a=pop@m;$b=pop@m;$hash{$a}=$b;
$a=pop@c;push(@c,$a);for(1..$a){$a=<>;push(@m,$a);
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
$a=pop@m;$b=pop@m;$hash{$a}=$b;
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
push(@m,'1');$a=pop@m;$b=pop@m;push(@m,$b+$a);
push(@m,'p');$a=pop@m;$b=pop@m;$hash{$a}=$b;
}$a=pop@c;push(@m,$a);
push(@m,'2');$a=pop@m;$b=pop@m;for(1..$a){push(@m,$b);};
$a=pop@m;$b=pop@m;push(@m,$b*$a);
$a=pop@m;push(@c,$a);
$a=pop@c;push(@c,$a);for(1..$a){push(@m,'1');$a=pop@m;push(@m,-$a);
push(@m,'p');$a=pop@m;$b=pop@m;$hash{$a}=$b;
$a=pop@c;push(@c,$a);for(1..$a){push(@m,'p');$a=pop@m;push(@m,$hash{$a});
push(@m,'1');$a=pop@m;$b=pop@m;push(@m,$b+$a);
push(@m,'p');$a=pop@m;$b=pop@m;$hash{$a}=$b;
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
$a=pop@m;push(@m,$hash{$a});
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
push(@m,'1');$a=pop@m;push(@m,-$a);
$a=pop@m;$b=pop@m;push(@m,$b+$a);
$a=pop@m;push(@m,$hash{$a});
$a=pop@m;$b=pop@m;if($b < $a){push(@c,1)}else{push(@c,0)};
$a=pop@c;push(@c,$a);for(1..$a){push(@m,'p');$a=pop@m;push(@m,$hash{$a});
$a=pop@m;push(@m,$hash{$a});
push(@m,'t');$a=pop@m;$b=pop@m;$hash{$a}=$b;
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
push(@m,'1');$a=pop@m;push(@m,-$a);
$a=pop@m;$b=pop@m;push(@m,$b+$a);
$a=pop@m;push(@m,$hash{$a});
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
$a=pop@m;$b=pop@m;$hash{$a}=$b;
push(@m,'t');$a=pop@m;push(@m,$hash{$a});
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
push(@m,'1');$a=pop@m;push(@m,-$a);
$a=pop@m;$b=pop@m;push(@m,$b+$a);
$a=pop@m;$b=pop@m;$hash{$a}=$b;
}$a=pop@c;push(@m,$a);
$a=pop@m;
}}push(@m,'0');push(@m,'p');$a=pop@m;$b=pop@m;$hash{$a}=$b;
$a=pop@c;push(@c,$a);for(1..$a){push(@m,'p');$a=pop@m;push(@m,$hash{$a});
$a=pop@m;push(@m,$hash{$a});
$a=pop@m;print$a;
push(@m,'p');$a=pop@m;push(@m,$hash{$a});
push(@m,'1');$a=pop@m;$b=pop@m;push(@m,$b+$a);
push(@m,'p');$a=pop@m;$b=pop@m;$hash{$a}=$b;
}

Eu estava optando pelo visual "cada linha parece com o mesmo ruído". A primeira linha de entrada (no STDIN) informa ao programa quantos números existem, enquanto o próximo N número de linhas contém um número que precisa ser classificado.


3
Perl baseado em pilha :)
Daniel Gratzer

Eu gostaria de ter uma explicação de como isso funciona? Eu tenho um palpite #
Xavier Combelle

12

Bogosort genérico e multithread em Java

46 segundos para classificar 4 números

Eu pensei que seria elegante com suporte para genéricos. Além disso, multithreading é sempre bom, então eu uso isso em vez de randomização: Este programa gera um thread para cada número a ser classificado. Cada encadeamento tenta inserir seu elemento em um objeto de matriz e, quando todos os elementos foram inseridos, o programa verifica se a matriz está classificada. Caso contrário, tente novamente. Obviamente, essa inserção precisa ser sincronizada.

ElementInserter

Essa será a classe que usamos para os threads. Esta classe contém um elemento e tenta inseri-lo no seu sortedArray:

class ElementInserter<E extends Comparable<? super E>> implements Runnable {
    E element;
    SortedArray<? super E> target;

    ElementInserter(E e, SortedArray<? super E> a) {
        element = e;
        target = a;
    }

    @Override
    public void run() {
        target.insert(element);
    }
}

SortedArray

Ostenta um método de inserção direta. Quando o último elemento foi inserido, ele verifica se a matriz está classificada.

class SortedArray<E extends Comparable<? super E>> {
    boolean sorted; int i = 0; E[] a;

    SortedArray(E[] e) { a = e; }

    synchronized public void insert(E e) {
        while (!sorted) {
            a[i++] = e;

            if (i == a.length) {
                sorted = true;

                for (int j = 1; j < i; ++j)
                    if (a[j-1].compareTo(a[j]) > 0) {
                        sorted = false;
                        i = 0;
                        notifyAll();
                    }

                if (sorted) {
                    for (int j = 0; j < a.length; ++j) System.out.print(a[j]+" ");
                    System.out.println();
                    notifyAll(); // allow all threads to terminate
                }

            } else
                try { wait(); }
                catch(InterruptedException x) { }
        }
    }
}

Método principal

Analisa os argumentos da linha de comando como Inteiros, cria uma nova matriz e um novo encadeamento para cada Inteiro:

    public static void main (String[] args) {
        Integer[] i = new Integer[args.length];
        SortedArray<Integer> c = new SortedArray<Integer>(i);

        for (String s : args)
            new Thread(new ElementInserter<Integer>(Integer.parseInt(s), c)).start();
    }

Execução de teste

O tempo de execução dependerá da ordem original dos elementos e da implementação do planejador. Este é um MacBook Pro Intel i7 de 2,9 GHz e núcleo duplo:

$ time java Main 3 1 2 4
1 2 3 4 

real    0m46.307s
user    0m14.629s
sys     0m26.207s

1
Haha +1 Eu tenho um pontapé com isso #
arshajii

10

JavaScript (com animação!). 8172 caracteres. Poucas horas para 6 números.

Nós gostamos de loteria, certo? Semelhante ao Bogosort por dan04, mas usando física e animação ...

(function(){var e={},v=!1,G=/abc/.test(function(){abc})?/\b_super\b/:/.*/,H=function(c,a,b){return function(){var l=this._super,s;this._super=b[c];try{s=a.apply(this,arguments)}finally{this._super=l}return s}};e.Class=function(){};e.Class.extend=function a(b){var l=this.prototype;v=!0;var s=new this;v=!1;for(var c in b)s[c]="function"===typeof b[c]&&"function"===typeof l[c]&&G.test(b[c])?H(c,b[c],l):b[c];b=function(){!v&&this.init&&this.init.apply(this,arguments)};b.prototype=s;b.prototype.constructor=
b;b.extend=a;return b};e.Events={};var k=e.Events,z,A,w=Object.prototype.toString,I=document.createEvent,r=Date.now;k.EventListener=e.Class.extend({handleEvent:function(){},init:function(a){this.handleEvent=a}},"EventListener");z=k.EventListener;k.Event=e.Class.extend({timeStamp:0,type:"",target:null,cancelable:!1,defaultPrevented:!1,preventDefault:function(){this.cancelable&&(this.defaultPrevented=!0)},initEvent:function(a,b){this.type=a;this.target=b;this.timeStamp=r()}},"Event");A=k.Event;var t=
Object.create(null);e.createEventType=function(a,b){t[a]=A.extend(b,a);return t[a]};e.createEvent=function(a){return null!=t[a]?(a=new t[a],a.timeStamp=r(),a):I(a)};k.EventTarget=e.Class.extend({_listeners:{},addEventListener:function(a,b,l){var c=this._listeners[a];if(!(null!=c&&function(){for(var a="object"===typeof l?l:null,d,e=0,f=c.length;e<f;e++)if(d=this.listeners[e],d.listener.handleEvent===b&&d.scope===a)return!0;return!1}())){var d={listener:"object"===typeof b&&b.handleEvent?b:new z(b),
scope:"object"===typeof l?l:null};"[object Array]"===w.call(c)?c.push(d):this._listeners[a]=[d]}},removeEventListener:function(a,b,c){a=this._listeners[a];if("[object Array]"===w.call(a)){c="object"===typeof c?c:null;for(var d=0,e=a.length;d<e;d++)if(a[d].listener.handleEvent===b&&a[d].scope===c){a.splice(d,1);break}}},dispatchEvent:function(a){a.target||(a.target=this);var b=0,c=this._listeners[a.type],d=c.length,e;if("[object Array]"===w.call(c))for(;b<d;b++)e=c[b].listener.handleEvent,e.call(c[b].scope,
a);return a.defaultPrevented}},"EventTarget");for(var B=0,k=["ms","moz","webkit","o"],h=0;h<k.length&&!window.requestAnimationFrame;++h)window.requestAnimationFrame=window[k[h]+"RequestAnimationFrame"],window.cancelAnimationFrame=window[k[h]+"CancelAnimationFrame"]||window[k[h]+"CancelRequestAnimationFrame"];window.requestAnimationFrame||(window.requestAnimationFrame=function(a){var b=r(),c=Math.max(0,16-(b-B)),d=window.setTimeout(function(){a(b+c)},c);B=b+c;return d});window.cancelAnimationFrame||
(window.cancelAnimationFrame=function(a){clearTimeout(a)});var x=window.clearInterval,C=window.setInterval,D=e.Class.extend({fn:function(){},args:[],thisArg:window,sleepTime:0,init:function(a,b,c){this.method=a||function(){};this.thisArg=b||window;this.args=c||[]}},"FunctionToCall"),r=Date.now,u=Object.create(null);u.animation=0;u.steady=1;u.as_fast_as_possible=2;e.Timer=e.Events.EventTarget.extend({ANIMATION:0,STEADY:1,AS_FAST_AS_POSSIBLE:2,TimerEvent:e.createEventType("TimerEvent",{FPS:0,targetFPS:0,
delta:0,initEvent:function(a,b){if(null==b.getFPS||null==b.targetFPS||null==b.dt)throw notATimerException;this.FPS=b.getFPS();this.targetFPS=b.targetFPS;this.delta=b.dt;this._super(a,b)}}),_clearIntervalFlag:!1,_recursionCounter:0,_tickHandlersFromMethod:Object.create(null),running:!1,paused:!1,mode:0,autoStartStop:!0,setAutoStartStop:function(a){this.autoStartStop=a},prevTime:0,dt:0,maxDelta:0.05,setMaxDelta:function(a){this.maxDelta=a},sysTimerId:-1,targetFPS:50,setFPS:function(a){this.targetFPS=
a;if(this.running&&this.mode===this.STEADY){x(this.sysTimerId);var b=this;this.sysTimerId=C(function(){b.tick()},1E3/a)}},getFPS:function(){return 1/this.dt},queue:[],addToQueue:function(a,b,c){var d=new D(a,b,c),e;this.queue.push(d);var f=function J(f){0<d.sleepTime?d.sleepTime-=f.delta:(e=a.apply(b,[f].concat(c)),"number"===typeof e&&0<e?d.sleepTime=e:!0!==e&&(this.removeEventListener("tick",J,this),this.queue.splice(this.queue.indexOf(d),1)))};null==this._tickHandlersFromMethod[a]?this._tickHandlersFromMethod[a]=
[f]:this._tickHandlersFromMethod[a].push(f);this.addEventListener("tick",f,this);this.autoStartStop&&!this.running&&this.startLoop()},removeFromQueue:function(a){var b=this._tickHandlersFromMethod[a];a=this.queue.indexOf(a);if(-1!==a){for(var c=0,d=b.length;c<d;c++)this.removeEventListener("tick",b[c],this);return this.queue.splice(a,1)}},getQueue:function(){return this.queue.slice(0)},pause:function(){this._clearIntervalFlag=this.paused=!0;this.dt=0},resume:function(){this.paused=!1;this.startLoop()},
startLoop:function(){this.prevTime=r();this.running=!0;if(this.mode===this.steady){var a=this;this.sysTimerId=C(function(){a.tick()},1E3/this.targetFPS)}else this.tick()},tick:function(){if(this._clearIntervalFlag&&-1!==this.sysTimer)x(this.sysTimerId),this.sysTimerId=-1,this._clearIntervalFlag=!1;else if(!this.paused){var a=r();this.dt=(a-this.prevTime)/1E3;this.dt>this.maxDelta&&(this.dt=this.maxDelta);if(0===this.dt&&4>this._recursionCounter)this._recursionCounter++,this.tick();else{0<this._recursionCounter&&
(this._recursionCounter=0);var b=e.createEvent("TimerEvent");b.initEvent("tick",this);this.dispatchEvent(b);this.prevTime=a;a=!(this.autoStartStop&&0>=this.queue.length);if(this.mode===this.AS_FAST_AS_POSSIBLE&&a){var c=this;setTimeout(function(){c.tick()},0)}if(this.mode===this.ANIMATION&&a){var d=this;requestAnimationFrame(function(){d.tick()})}a||(this.running=!1,this.mode===this.STEADY&&-1!==this.sysTimerId&&(x(this.sysTimerId),this.sysTimerId=-1))}}},init:function(a){this.mode="number"===typeof a?
a:u[a];if(null==this.mode||0>this.mode||2<this.mode)this.mode=0}},"Timer");e.Timer.ANIMATION=0;e.Timer.STEADY=1;e.Timer.AS_FAST_AS_POSSIBLE=2;e.Timer.FunctionToCall=D;var j=[2,3,5,8,4,6],m=new (e.Class.extend({displace:0,velocity:0,drag:0.01,tickInterval:10,update:function(a){this.displace+=this.velocity*a.delta;this.velocity*=1-this.drag},init:function(){}})),q=j.slice(0),k=new e.Timer(0),h=document.createElement("div");h.style.width=23*j.length-28+"px";h.style.height="22px";h.style.overflowX="hidden";
h.style.overflowY="hidden";h.style.border="1px #555 solid";h.style.fontFamily='Consolas, "Courier New"';for(var c=[],f=0;f<j.length;f++)c[f]=document.createElement("div"),c[f].style.width="20px",c[f].style.height="20px",c[f].style.display="inline-block",c[f].style.position="relative",c[f].style.left=f+1===j.length?"-22px":"0px",c[f].style.top=f+1===j.length?"-22px":"0px",c[f].style.border="1px #AAA solid",c[f].style.textAlign="center",c[f].innerHTML=j[f],h.appendChild(c[f]);var g=0,d=1,n,p,E=0,F=
0,y=0;m.velocity=1E3*Math.random()+500;document.getElementsByTagName("body")[0].appendChild(h);k.addToQueue(function(a){if(5>m.velocity)if(0===g){for(a=0;a<c.length;a++)if((m.displace+22+22*a)%(22*j.length)-22<11*c.length&&(m.displace+22+22*a)%(22*j.length)>11*c.length){n=c[a];E=parseFloat(n.style.left);break}for(a=0;a<c.length;a++)if((m.displace+22+22*a)%(22*j.length)<11*c.length&&(m.displace+22+22*a)%(22*j.length)+22>11*c.length){p=c[a];F=parseFloat(p.style.left);break}y=p.offsetLeft-n.offsetLeft;
g=1}else if(1===g)n.style.backgroundColor="rgba(255,255,0,"+Math.round(1-d)+")",p.style.backgroundColor="rgba(255,255,0,"+Math.round(1-d)+")",d-=10*a.delta,0>d&&(g=2);else if(2==g)n.style.backgroundColor="rgba(255,255,0,"+Math.round(1-d)+")",p.style.backgroundColor="rgba(255,255,0,"+Math.round(1-d)+")",d+=10*a.delta,1<d&&(g=3,n.style.backgroundColor="rgba(255,255,255,0)",p.style.backgroundColor="rgba(255,255,255,0)",d=0);else if(3==g)n.style.left=E+d*y+"px",p.style.left=F-d*y+"px",d+=2*a.delta,1<
d&&(g=4);else if(4==g){if(d-=a.delta,0.5>d){a=c.indexOf(n);var b=c.indexOf(p),e;e=n.innerHTML;c[a].innerHTML=p.innerHTML;c[b].innerHTML=e;e=q[a];q.splice(a,1,q[b]);q.splice(b,1,e);b=-1/0;for(a=0;a<q.length;a++){if(q[a]<b){g=5;break}b=q[a]}g=5===g?5:6}}else if(5===g)d=1,m.velocity=1E3*Math.random()+500,g=0;else{if(6===g)return d=1,g=0,document.getElementsByTagName("body")[0].innerHTML+=q,!1}else{m.update(a);for(a=0;a<c.length;a++)b=(m.displace+22+22*a)%(22*j.length),a+1===j.length&&(b+=22*(j.length-
1)),c[a].style.left=b-22*a-22+"px"}return!0})})();​

No entanto, usei um pouco do Google Closure Compiler para ... não sei. Mas parece mais feio, certo?

É como uma daquelas rodas lotórias, e cada vez que para, muda para números no meio. Você pode jogar aqui: http://jsfiddle.net/VkJUE/5/ (para entender o que eu quero dizer)

Funciona um pouco, exceto que pode levar horas para 6 números. No entanto, eu testei em 3 números e funciona bem!


7

Embora eu não possa receber crédito por esse código Java , o Smoothsort é um bom exemplo da troca entre legibilidade e desempenho:

static final int LP[] = { 1, 1, 3, 5, 9, 15, 25, 41, 67, 109,
  177, 287, 465, 753, 1219, 1973, 3193, 5167, 8361, 13529, 21891,
  35421, 57313, 92735, 150049, 242785, 392835, 635621, 1028457,
  1664079, 2692537, 4356617, 7049155, 11405773, 18454929, 29860703,
  48315633, 78176337, 126491971, 204668309, 331160281, 535828591,
  866988873 // the next number is > 31 bits.
};

public static <C extends Comparable<? super C>> void sort(C[] m,
    int lo, int hi) {
  int head = lo; // the offset of the first element of the prefix into m

  int p = 1; // the bitmap of the current standard concatenation >> pshift
  int pshift = 1;

  while (head < hi) {
    if ((p & 3) == 3) {
      sift(m, pshift, head);
      p >>>= 2;
      pshift += 2;
    } else {
      // adding a new block of length 1
      if (LP[pshift - 1] >= hi - head) {
        // this block is its final size.
        trinkle(m, p, pshift, head, false);
      } else {
        // this block will get merged. Just make it trusty.
        sift(m, pshift, head);
      }

      if (pshift == 1) {
        // LP[1] is being used, so we add use LP[0]
        p <<= 1;
        pshift--;
      } else {
        // shift out to position 1, add LP[1]
        p <<= (pshift - 1);
        pshift = 1;
      }
    }
    p |= 1;
    head++;
  }

  trinkle(m, p, pshift, head, false);

  while (pshift != 1 || p != 1) {
    if (pshift <= 1) {
      // block of length 1. No fiddling needed
      int trail = Integer.numberOfTrailingZeros(p & ~1);
      p >>>= trail;
      pshift += trail;
    } else {
      p <<= 2;
      p ^= 7;
      pshift -= 2;

      trinkle(m, p >>> 1, pshift + 1, head - LP[pshift] - 1, true);
      trinkle(m, p, pshift, head - 1, true);
    }

    head--;
  }
}

private static <C extends Comparable<? super C>> void sift(C[] m, int pshift,
    int head) {   
  C val = m[head];

  while (pshift > 1) {
    int rt = head - 1;
    int lf = head - 1 - LP[pshift - 2];

    if (val.compareTo(m[lf]) >= 0 && val.compareTo(m[rt]) >= 0)
      break;
    if (m[lf].compareTo(m[rt]) >= 0) {
      m[head] = m[lf];
      head = lf;
      pshift -= 1;
    } else {
      m[head] = m[rt];
      head = rt;
      pshift -= 2;
    }
  }  

  m[head] = val;
}

private static <C extends Comparable<? super C>> void trinkle(C[] m, int p,
    int pshift, int head, boolean isTrusty) {

  C val = m[head];

  while (p != 1) {
    int stepson = head - LP[pshift];

    if (m[stepson].compareTo(val) <= 0)
      break; // current node is greater than head. Sift.

    if (!isTrusty && pshift > 1) {
      int rt = head - 1;
      int lf = head - 1 - LP[pshift - 2];
      if (m[rt].compareTo(m[stepson]) >= 0
          || m[lf].compareTo(m[stepson]) >= 0)
        break;
    }

    m[head] = m[stepson];

    head = stepson;
    int trail = Integer.numberOfTrailingZeros(p & ~1);
    p >>>= trail;
    pshift += trail;
    isTrusty = false;
  }

  if (!isTrusty) {
    m[head] = val;
    sift(m, pshift, head);
  }
}

/* insert some basic static void main here... 
   my Java's too rusty to do it from the top of my head 
*/

(observação: alguns comentários foram removidos para torná-lo mais curto; fonte retirada da página da wikipedia vinculada acima)


Você poderia adicionar o idioma que você usou para isso na postagem?
Nathan Osman

“Compromisso entre legibilidade e desempenho” - preciso lembrar disso.
FUZxxl 14/03/2015

7

O F # "Eu odeio programação funcional":

let numbers = System.Console.ReadLine().Split(',')
let mutable check = 0
let mutable sorted = ""

while not (sorted.Split(',').Length = numbers.Length) do
    for i in [check..check + 1000] do
        for number in numbers do
            if number = i.ToString() then
                if sorted.Length > 0 then
                    sorted <- sorted + "," 
                sorted <- sorted + number
    check <- check + 1000

printfn "%s" sorted

7

Ruby Metasort

#I know Ruby has a built-in method to order an array,
#but I can't remember what it is.  Oh well, metaprogramming to the rescue!
#I'll just try all of the available methods, and see which one works.

#check whether an array is ordered
def is_in_order? arr
  arr.is_a?(Array) && (0...(arr.size-1)).all? {|i| arr[i]<arr[i+1]}
end

Array.instance_methods.each do |meth|
  begin
    possibly_ordered_array = ARGV.map(&:to_i).send(meth)
    #have to check both that the new array is ordered, and that it's still the same size,
    #so that methods that change the array's elements don't create false positives.
    if is_in_order?(possibly_ordered_array) && possibly_ordered_array.size == ARGV.size
      puts possibly_ordered_array.join(", ")
      exit 0 #success!
    end
  rescue
    #method needed an argument or something
  end
end

exit 1 #could not order the array

6

Um subprograma Cobol para classificar uma tabela de números inteiros, com garantia de um WTF / minuto maior que qualquer outro idioma. Para fins de desempenho, o algoritmo QuickSort é usado:

Identification Division.                                        
Program-ID. QwikSort is recursive.                              
Environment Division.                                           
Data Division.                                                  
Working-Storage Section.                                        
01 QwikSort-Working-Storage.                                    
 05 Swap-Space           Pic X(80) Value spaces.               
 05 Pivot         Binary Pic S9(8).                            
 05 I             Binary Pic S9(8).                            

Local-Storage Section.                                          
01 QwikSort-Local-Storage.                                      
 05 Lo            Binary Pic S9(8) Value 0.                    
 05 Hi            Binary Pic S9(8) Value 0.                    

Linkage Section.                                                

01 The-Table-Area.                                              
 05 The-Table     occurs 0 to 200000 depending on High-Element.
  10 The-Key     Binary Pic S9(8).                            

01 Low-Element     Binary Pic S9(8).                            
01 High-Element    Binary Pic S9(8).                            

Procedure Division using The-Table-Area                         
                         Low-Element                            
                         High-Element.                          

  Compute Lo  = Low-Element                                   
  Compute Hi  = High-Element                                  

  If ( High-Element > Low-Element )                           
     Perform Select-Pivot          

* ----- Loop through table until indices cross                   
       Perform until Hi < Lo                                    

* -------- Locate an item that should not be in less partition    
          Perform varying Lo from Lo by 1                        
            until (( Lo >= High-Element )                        
               or  ( The-Key of The-Table ( Lo ) >= Pivot ))     
          End-Perform                                            


* -------- Locate an item that should not be in greater partition 
          Perform varying Hi from Hi by -1                       
            until (( Hi <= Low-Element )                         
               or  ( The-Key of The-Table ( Hi ) <= Pivot ))     
          End-Perform                                            

* -------- Exchange the two and keep looking                      
          If ( Lo <= Hi )                                        
             Perform Swap-Elements                               
             Compute Lo = Lo + 1                                 
             Compute Hi = Hi - 1                                 
          End-If                                                 

    End-Perform                                               

    Perform Qsort-Less-Partition                              

    Perform Qsort-Greater-Partition                           

 End-If                                                       

 Goback.                                                      

*--------------------------------------------------------------*  
* Select the pivot using median of three rule.                    
*--------------------------------------------------------------*  
 Select-Pivot.                                                    

    Compute Pivot = ( Lo + Hi ) / 2                              
    Compute Pivot = Function Median (                            
            The-Key of The-Table ( Lo )                          
            The-Key of The-Table ( Pivot )                       
            The-Key of The-Table ( Hi )                          
         )                                                       
    End-Compute                                                  

    Exit.                                                        

*--------------------------------------------------------------*  
* Exchange elements in the wrong partition                        
*--------------------------------------------------------------*  
 Swap-Elements.                                                   
    Move The-Table ( Lo ) to Swap-Space                          
    Move The-Table ( Hi ) to The-Table ( Lo )                    
    Move Swap-Space       to The-Table ( Hi )                    
    Exit.                   

*--------------------------------------------------------------*  
* Sort the less sub-partition                                     
*  -- Optimization opportunity for the user: if the partition     
*    size is sufficiently small you might want to apply a simple  
*    sort like insertion or bubble, or perhaps a bose-nelson      
*    network to order the last few and save the overhead of       
*    another recursive call.                                      
*--------------------------------------------------------------*  
 Qsort-Less-Partition.                                            
    If ( Low-Element < Hi )                                      
       Call 'QwikSort' Using                                     
          The-Table-Area                                         
          Low-Element                                            
          Hi                                                     
       End-Call                                                  
    End-If 
    Exit.                                                        

*--------------------------------------------------------------*  
* Sort the greater sub-partition                                  
*  -- Optimization opportunity for the user: same as left part.   
*--------------------------------------------------------------*  
 Qsort-Greater-Partition.                                         
    If ( Lo < High-Element )                                     
       Call 'QwikSort' Using                                     
          The-Table-Area                                         
          Lo                                                     
          High-Element                                           
       End-Call                                                  
    End-If                              
    Exit.                                                        

 End Program QwikSort.

Existe uma razão pela qual é em QwikSortvez de QuickSort? (ou seja, restrição de comprimento ou você não pode usar a letra u em um nome?) Porque isso tornaria ainda mais divertido: P
marinus

@ marinus Provavelmente é uma restrição de vinculador.
Craig Trader

não maiúsculas suficiente depois, no entanto
Xavier Combelle

É "QwikSort", em vez de "QuickSort", caber na restrição de oito caracteres inserida em itens de sistemas operacionais mais antigos. O "QwikSort" se encaixa perfeitamente em um MVS PDS ou em uma máquina DOS antiga.
Joe Zitzelberger

A maiúsculas não é necessário, Cobol faz minúsculas muito bem, estou feliz de ir jogar boliche, mas vamos ser real, isso não é 1974 ...
Joe Zitzelberger

4
var inp = [1, 4, 7, 2, 5],
    loops = 0,
    trysort;

while(++loops) {
    trysort = new Array(inp.length);

    for(var i = 0, len = inp.length; i < len; i++) {
        trysort[i] = inp[~~(Math.random()*inp.length)];
    }

    if( trysort.join(',') === '1,2,4,5,7' )
        break;
}
alert('done! Only ' + loops + ' iterations! ' + trysort);

http://www.jsfiddle.net/sAFMC/


codificado no array tut tut.
Raynos

Bogosort para a vitória! \ o /
Chris Jester-Young

legais. eu gosto disso.
Vaibhav

4

Quicksort em Python usando lambda

Algo que escrevi no meu blog:

qsort = lambda seq: [] if not seq else qsort(filter(lambda n: n<=seq[0], seq[1:]))+[seq[0]]+qsort(filter(lambda n: n>seq[0], seq[1:]))

Aqui está o post real


1
Ótima solução! A mais curta quick conhecido em Python é somente 79 bytes de comprimento (cortesy codegolfer lendário Mark Byers): news.e-scribe.com/314#581
hallvabo

Essa é uma solução muito esotérica. Explodiu minha mente!
MrD 26/12/12

4

Rubi

#get user input from standard input and store it in a variable
var = gets
#make user input into a ruby array in a string
array_string = '[' + var + ']'
#evaluate this ruby array and store the array in a variable
array = eval(array_string)
#convert from strings to integers
#initialize loop variable as 0
i = 0
#loop until the loop variable is no longer small enough
#to be a valid index of the array
until !(i < array.length)
    #convert to a number then ensure it is an integer
    array[i] = array[i].to_f.floor
    #increment i
    i = i + 1
end

sorted = false

#infinite loop
while true
    #if it hasn't been sorted
    if ((!sorted) == true)
        #try to sort it
        #initialize loop variable as 0
        j = 0
        #loop while i is less than or equal to the length of the array
        while (i <= array.length)
            random = rand # get a random number
            #this gets a zero or one
            random = (random + random.round).floor
            #turn random into a boolean
            if random == 0
                random = true
            end
            if random == 1
                random = false
            end
            #don't do anything if this is the last one
            if j == (array.length - 1)
                #do nothing
            else
                if random == true
                    #true means keep these 2 elements in the same order
                end
                if random == false
                    #false means swap with next element
                    #initialize a variable to store the current element
                    swapvar = array[j]
                    #initialize a variable to store the next element
                    swapvar2 = array[j+1]
                    #set the current element to what was the next element
                    array[j] = swapvar2
                    #set the next element to what was in this one
                    array[j+1] = swapvar
                end
            end
            #increment j
            j = j + 1
            #loop kept looping, fixed now
            if j >= array.length
                break
            end
        end
        #now test if it is sorted
        #lets say it is
        sorted = true
        #now see if we are wrong
        #initialise a loop variable to zero
        k = 0
        while (array.length > k)
            #get current value from array and store it in a variable
            current = array[k]
            #get current value from array and store it in a variable
            next_ = array[k + 1]
            if !(array[k +1].nil? == true)#stop errors
                #if sorted correctly
                if next_ < current || next_ == current
                    #sorted stil== true
                else
                    sorted = false #not sorted, try again
                end
            end
            #increment loop variable
            k = k + 1
        end
            #DEBUG
        #p array
    else
        break #break out of infinite loop
    end
end


#it is now sorted in descending order
#we want ascending so lets flip it

#initialise a loop variable to zero
l = 0

final_array = Array.new([])

while (l <= (array.length - 1))
    final_array[array.length - l - 1] = array[l]
    #increment loop variable
    l += 1
end

#now we need to make it into a string
str = ''

#first map each element to a string
#to do this lets extend Array, then use this for our array
class Array
    def map #map each element to a string
        #initialise a loop variable to zero
        @m = 0
        arr = []
        while @m < self.length
            arr += [self[@m].to_s]
            #increment loop variable
            @m = @m + 1
        end
        return arr
    end
end

final_array = Array.new(final_array).map()
#DEBUG
#p final_array

#now add the elements to a string, separated by commas and spaces
#initialise a loop variable to zero
n = 0

while n < array.length
    #increment loop variable
    #add item to string
    str = str + final_array[n]
    #if not last item
    if !((array.length - 1 )== n)
        #add comma
        str += ','
    end
    #if not last item
    if !((array.length - 1 )== n)
        #add space
        str += ' '
    end
    n = n + 1
end

#now print the string
puts str

3

C ++ (4409)

#include <iostream>
#include <cstdlib>
#include <cctype>
#include <string>
#include <sstream>


std::string itostr(int number)
{
   std::stringstream ss;
   ss << number;
   return(ss.str());
}


class CStackLIFO
{
private:
    int* stack;
    size_t len;
public:
    CStackLIFO();
    CStackLIFO(int);
    ~CStackLIFO();
    void init();
    void init(int);
    void push(int);
    int pop();
    int pop(int&);
    void destroy(size_t);
    int get(size_t);
    size_t get_len();
};


void CStackLIFO::init()
{
    len = 0;
    stack = NULL;
}


void CStackLIFO::init(int val)
{
    len = 1;
    stack = new int[len];
    stack[0] = val;
}


CStackLIFO::CStackLIFO()
{
    init();
}


CStackLIFO::CStackLIFO(int val)
{
    init(val);
}


CStackLIFO::~CStackLIFO()
{
    len = 0;
    delete[] stack;
    stack = NULL;
}


void CStackLIFO::push(int val = NULL)
{
    if((stack == NULL) || (len == 0))
    {
        this->init(val);
    }
    else
    {
        int* buf = stack;
        len++;
        stack = new int [len];

        for(size_t i = 0; i < (len - 1); i++)
        {
            stack[i] = buf[i];
        }

        stack[len - 1] = val;
        delete[] buf;
    }
}


int CStackLIFO::pop()
{
    int val;
    int* buf = stack;
    len--;
    stack = new int [len];

    for(size_t i = 0; i < len; i++)
    {
        stack[i] = buf[i];
    }

    val = buf[len];
    delete[] buf;

    return(val);
}


int CStackLIFO::pop(int &out)
{
    if(len <= 0)
        return(false);

    int* buf = stack;
    len--;
    stack = new int [len];

    for(size_t i = 0; i < len; i++)
    {
        stack[i] = buf[i];
    }

    out = buf[len];
    delete[] buf;

    return(true);
}


void CStackLIFO::destroy(size_t idx)
{
    int* buf = stack;
    len--;
    stack = new int [len];
    for(size_t i = 0; i < idx; i++)
    {
        stack[i] = buf[i];
    }
    for(size_t i = idx; i < len; i++)
    {
        stack[i] = buf[i + 1];
    }
    delete[] buf;
}


int CStackLIFO::get(size_t idx)
{
    return(stack[idx]);
}


size_t CStackLIFO::get_len()
{
    return(len);
}


class CSort
{
private:
    void removeWhitespace();
public:
    std::string in;
    void sort();
    void display();
};


void CSort::display()
{
    std::cout << in << std::endl;
    return;
}


void CSort::removeWhitespace()
{
    for(size_t i = 0; i < in.size(); i++)
    {
        if(in[i] == ' ')
        {
            in = in.substr(0, i) + in.substr(i+1);
        }
    }
}


void CSort::sort()
{
    removeWhitespace();

    CStackLIFO nums;
    CStackLIFO s;

    // build stack
    for(size_t i = 0, offset = 0; i < in.size(); i++)
    {
        for(offset = 0; (i + offset) < in.size(); offset++)
        {
            if(!(isdigit(in[i + offset]) ||
                 (in[i + offset] == '-')))
                break;
        }

        if(offset > 0)
        {
            nums.push(atoi(in.substr(i, offset).c_str()));
        }

        i += offset;
    }

    // sort
    for(size_t lowest = 0; 0 < nums.get_len(); lowest = 0)
    {
        for(size_t i = 0; i < nums.get_len(); i++)
        {
            if(nums.get(i) < nums.get(lowest))
                lowest = i;
        }

        s.push(nums.get(lowest));
        nums.destroy(lowest);
    }    

    // convert to string
    in = "";
    for(size_t i = 0; i < s.get_len(); i++)
    {
        // Convert num to string
        in += itostr(s.get(i));
        in += ", ";
    }
    if(in.size() > 2)
        in = in.substr(0, in.size() - 2);
}


int main(int argc, char* argv[])
{
    while(1)
    {
        CSort unsorted;
        unsorted.in = "";

        while(1)
        {
            std::string userin = "";
            std::cin >> userin;

            if(userin.compare("end") == 0)
                break;

            unsorted.in += userin + ", ";
        }

        unsorted.in = unsorted.in.substr(0, unsorted.in.size() - 2);

        CSort sorted;
        sorted.in = unsorted.in;
        sorted.sort();

        std::cout << "Input:" << std::endl;
        unsorted.display();
        std::cout << "Output:" << std::endl;
        sorted.display();
    }

    return(0);
}

Algumas coisas "ruins" sobre este programa:

  • Realmente pegajoso. :) Eu poderia simplesmente ter inserido os números diretamente, em vez de analisar a sequência de números.

  • Usa classes excessivas. Eu poderia ter usado os embutidos também, mas um codificador ruim simplesmente reinventaria a roda.

  • O loop para o tipo é terrivelmente ineficiente. Eu acho que é o caminho mais lento possível, sem parecer que eu realmente tentei torná-lo lento. Na verdade, a parte "de classificação" real do código tem apenas 11 linhas, incluindo chaves e quebras de linha.


3

Este é O (n * n!)

from itertools import permutations, izip, islice
L=[10,9,8,7,6,5,4,3,2,1]
for l in permutations(L):
    if all([i<j for i,j in izip(L, islice(L,1,None))]):
        break
print l

Ele itera todas as permutações da lista e testa se elas estão classificadas. É tão horrível que classificar apenas 10 itens leve 17 segundos

$ time python badsort.py 
(1, 2, 3, 4, 5, 6, 7, 8, 9, 10)

real    0m17.563s
user    0m17.537s
sys     0m0.020s

3

T-SQL

(SQL Server 2008 R2)

Naturalmente, com o T-SQL, você usa "ORDER BY" para classificar. Duhhh.

DECLARE @LISTIN NVARCHAR(MAX);
SELECT @LISTIN = N'1, 4, 7, 2, 5'; --Input list goes here.
DECLARE @LISTINDEX BIGINT;
SELECT @LISTINDEX = 0;
DECLARE @CHARS NVARCHAR(MAX);
SELECT @CHARS = N'';
DECLARE @LISTOUT NVARCHAR(MAX);
SELECT @LISTOUT = N'';
DECLARE @ORDERBY TABLE (NUMBER NVARCHAR(MAX));
WHILE @LISTINDEX < LEN(@LISTIN) BEGIN;
SELECT @LISTINDEX = @LISTINDEX + 1;
SELECT @CHARS = @CHARS + SUBSTRING(@LISTIN, @LISTINDEX, 1);
IF PATINDEX(N'%, ', @CHARS) > 0 BEGIN;
INSERT INTO @ORDERBY (NUMBER) VALUES (REPLACE(@CHARS, N', ', N''));
SELECT @CHARS = N'';
END;
IF @LISTINDEX = LEN(@LISTIN) BEGIN;
INSERT INTO @ORDERBY (NUMBER) VALUES (@CHARS);
END;
END;
DECLARE ORDERBY CURSOR FOR SELECT NUMBER FROM @ORDERBY ORDER BY CONVERT(DECIMAL, NUMBER);
OPEN ORDERBY;
FETCH NEXT FROM ORDERBY INTO @CHARS;
WHILE @@FETCH_STATUS = 0 BEGIN;
SELECT @LISTOUT = @LISTOUT + @CHARS + N', ';
FETCH NEXT FROM ORDERBY INTO @CHARS;
END;
CLOSE ORDERBY;
DEALLOCATE ORDERBY;
IF @LISTOUT = N'' SELECT @LISTOUT;
ELSE SELECT SUBSTRING(@LISTOUT, 1, LEN(@LISTOUT) - 1);

Veja o "PEDIDO POR"? Está bem ali na declaração do cursor.


2

Implementação em Python do Funnel Sort . Na verdade, esse algoritmo pode ter um bom desempenho de cache quando implementado corretamente, o que, nesse caso, certamente não é (no entanto, é classificado corretamente).

class Funnel(object):
  """ In place funnel sorting algorithm. """
  def __init__(self, left_child, right_child):
    self.left_child = left_child
    self.right_child = right_child
    self.lookahead = (False, -1)

  def get_next(self):
    if self.left_child.has_next() and self.right_child.has_next():
      l, r = self.left_child.get_next(), self.right_child.get_next()
      if l < r:
        self.right_child.put_back(r)
        return l
      else:
        self.left_child.put_back(l)
        return r
    elif self.left_child.has_next():
      return self.left_child.get_next()
    elif self.right_child.has_next():
      return self.right_child.get_next()
    else:
      raise Exception("Out of elements.")

  def has_next():
    if self.lookahead[0]: 
      self.lookahead = (False, self.lookahead[1])
      return self.lookahead[1]
    return self.left_child.has_next() or self.right_child.has_next()

  def put_back(self, item):
    self.lookahead = (True, item)

class Funnel_Base(Funnel):
  def __init__(self, buffer):
    self.buf = buffer
    self.lookahead = (False, -1)

  def get_next(self):
    if self.lookahead[0]:
      self.lookahead = (False, self.lookahead[1])
      return self.lookahead[1]
    return self.buf.pop(0)

  def has_next():
    return len(self.buf) > 0

def make_funnel(funnels):
  while len(funnels) > 1: funnels.append(Funnel(funnels.pop(0), funnels.pop(0)))
  return funnels[0]

def insertion_sort(array):
  def swap(i, j):
    t = array[i]
    array[i] = array[j]
    array[j] = t
  for i in xrange(1,len(array)):
    while i > 0 and  array[i] < array[i-1]:
      swap(i, i-1)
      i -= 1

def funnel_sort_internal(array):
  if len(array) < 100:
    # sort subsections with insertion sort and make base funnels
    insertion_sort(array)
    return Funnel_Base(array)
  else:
    K = int(len(array)**(1.0/3))
    new_funnels = [funnel_sort_internal(array[base:min(base+K, len(array))])
                   for base in xrange(0, len(array), K)]
    return make_funnel(funnels)

def funnel_sort(array):
  cp = array[:]
  srtd = funnel_sort_internal(cp)
  for i in xrange(len(array)): array[i] = cp[i]

2

Classifica uma lista de números inteiros de 32 bits. Na verdade, é bastante eficiente para a maioria dos casos comuns:

#include <assert.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>

static unsigned char *bmp[131072];
static size_t total, printed;

static void set(int n);
static void print_page(unsigned char *page, int offset);
static void print_number(int n);

int main(void)
{
    int i, n;

    assert(INT_MIN == -2147483647 - 1 && INT_MAX == 2147483647);

    while (scanf("%d,*", &n) > 0) {
        set(n);
        total++;
    }

    for (i = 0; i < 131072; i++)
        if (bmp[i] != NULL)
            print_page(bmp[i], INT_MIN + i * 32768);
    putchar('\n');

    return 0;
}

static void set(int n)
{
    unsigned int i = n - INT_MIN;

    if (bmp[i >> 15] == NULL)
        bmp[i >> 15] = calloc(4096, sizeof(unsigned char));

    bmp[i >> 15][(i >> 3) & 4095] |= (unsigned int)1 << (i & 7);
}

static void print_page(unsigned char *page, int offset)
{
    int i, j;

    for (i = 0; i < 4096; i++, offset += 8)
        if (page[i])
            for (j = 0; j < 8; j++)
                if (page[i] & (1 << j))
                    print_number(offset + j);
}

static void print_number(int n)
{
    printf("%d%s", n, ++printed < total ? ", " : "");
}

Exemplo:

$ echo '1, 4, -3, 7, -2147483648, 2147483647, 2, 5' | ./bitmap-sort
-2147483648, -3, 1, 2, 4, 5, 7, 2147483647

2
<?php
    /*  THIS SOFTWARE IS PROVIDED "AS IS" AND ANY
        EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,
        BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
        OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
        PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
        REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
        INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
        CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
        TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
        LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
        INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
        LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
        OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
        IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
        ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.          */

    // Make the function
    function sort_numbers($nums) {
        // Remove duplicates from array
        array_unique($nums);
        // Filter out everything that's not a number or a numeric string
        foreach ($nums as $val) {
            if (!is_numeric($val)) {
                unset($array[$val]);
            }
        }
        // Do some random computations
        class SorterFunction {
            public $timestamp = 0;
            public $rand_num = 0;
            public function sort_a_numeric_array($num_arr) {
                // Sort the array
                sort($num_arr, SORT_NUMERIC);
                return $num_arr;
            }
            public function __construct() {
            $this->timestamp = time();
            $this->rand_num = rand() % 100000;
        }
    }
    // Create a new SorterFunction class
    $MySorterFunction = new SorterFunction();
    // Print out the sorted array's elements using var_dump
        $MySorterFunction->sort_a_numeric_array($nums);
        var_dump($nums);
    }
    $my_nums = array(1, 4, 7, 2, 5);
    sort_numbers($my_nums);
?>

Isso nem vai funcionar, já que sort()funciona por referência e nem retorna nada ...
ircmaxell

@ircmaxell: Corrigido, obrigado.
usar o seguinte código

suspiro. (embora seja um wtf, isso conta tecnicamente). Mas ele ainda não funciona (mudança de tipo errado)
ircmaxell

1
+1 para licença, mas poderia ter coberto mais linhas.

1
@ Tim Veja a atualização. ;)
nyuszikah:

2

C ++ , não tenho certeza se existe um nome para esse tipo, mas aqui vai<ducks for cover/>

#include <iostream>
#include <vector>
#include <iterator>
#include <algorithm>

int main(void)
{
  std::istream_iterator<int> in(std::cin), end;
  std::vector<int> input(in, end);

  std::cout << "sorting.." << std::endl;
  std::copy(input.begin(), input.end(), std::ostream_iterator<int>(std::cout, " "));
  std::cout << std::endl;

  // this is the smart bit.. ;)
  while (std::next_permutation (input.begin(), input.end()));

  std::cout << "sorted.." << std::endl;
  std::copy(input.begin(), input.end(), std::ostream_iterator<int>(std::cout, " "));
  std::cout << std::endl;

  return 0;
}

É semelhante ao BogoSort, com a diferença de que a pior complexidade do seu caso é a complexidade média do caso do Bogosort.
saeedn

2

Uma solução corporativa (em pseudocódigo):

create sql connection
create temporary table: one autoincrementing ID field and one value field
convert array into xml
post xml to sql database
use stored procedure to create records from xml
run sql command "select * from temptable sort by value"
iterate records, adding to array
drop temporary table
close connection

2

Em Ruby, uma representação visual de um " Spaghetti Sort" , projetado para ser executado em um terminal de 80 colunas:

$CONSOLE_WIDTH = 78
def sort a
  factor = $CONSOLE_WIDTH.to_f/a.max
  puts "Strands:"
  puts (strands=a.map{|v|['-'*(v*factor).to_i,v*factor]}).map{|s|s.first}
  results=[];
  len=0
  n = 1
  until strands.empty? do
   #puts "\nITERATION #{n}\n\n"
    n+=1
    $CONSOLE_WIDTH.downto(0) do |i|
      len = i
      contacts = strands.find_all{|s|s.first[i]!=nil}
      break unless contacts.empty?
    end
    puts "\nResults:"
    puts results.map{|s|s.first}
    puts "\nStrands:"
    puts strands.map{|s|s.first.ljust(len+1)+"|"}
    longest = strands.sort_by{|s|s.last}.max
    strands.delete_at strands.index(longest)
    results << longest
  end
  puts "\nResults:"
  puts results.map{|s|s.first}
  return results.map{|s|s.last/factor}

end

Uso: p sort (1..10).map{rand(100)}


2

PL \ SQL - 109 linhas

Esta é uma resposta ao comentário do @ eBusiness na resposta de @ steenslag. Não serve a nenhum propósito útil.

Possui 4 etapas:

  1. Pegue uma lista de números separados por vírgula e calcule quantas vírgulas estão nela.
  2. Use o número de vírgulas para dividir a sequência posicionalmente com base nas vírgulas.
  3. Faça um loop pelo número conhecido de valores e encontre o valor mínimo a cada vez - excluindo o mínimo anterior à medida que avançamos.
  4. Saída eles.

 create or replace procedure sort ( Plist_of_numbers varchar2 ) is

   type t_num_array is table of number index by binary_integer;

   t_sorted t_num_array;
   t_unsorted t_num_array;

   i binary_integer := 0;
   -- Can you tell this one was an afterthought?
   x binary_integer := 0;

   no_of_commas integer := 0;

   v_list_of_numbers varchar2(32000);
   v_min_value number;
   v_min_index binary_integer;

begin

   -- Best to be overly careful about these things.
   if trim(Plist_of_numbers) is null then
      raise_application_error(-20000,'You need to give me something to work with.');
   end if;

   -- Firstly we have to make sure that there is a trailing comma
   -- in Plist_of_numbers for this to work.
   if substr(Plist_of_numbers,-1) = ',' then
      v_list_of_numbers := Plist_of_numbers;
   else
      v_list_of_numbers := Plist_of_numbers || ',';
   end if;


   /* SQL ( being SQL ) we had to pass in a string of numbers
      because we'd need to create a type outside the function which
      wouldn-t really be in the spirit of things so, let's unpack
      our string. In order to do this ( bowling ) we need to know how
      many commas are in our sting.
   */

   for j in 1 .. length(v_list_of_numbers) loop

      if substr(v_list_of_numbers,j,1) = ',' then
         no_of_commas := no_of_commas + 1;
      end if;

   end loop;


   -- Next we unpack our list into t_unsorted;
   for j in 1 .. ( no_of_commas - 1 ) loop

      i := i + 1;
      t_unsorted(i) := to_number( substr( v_list_of_numbers
                                        , instr(v_list_of_numbers, ',', 1, j)
                                        , instr(v_list_of_numbers, ',', 1, j + 1)
                                           )
                                  );

   end loop;


   -- Next the actual sorting.
   -- Loop through the known number of elements in the array.
   for j in 1 .. i loop

      -- Then the array each time to find the minimum.
      -- As we-re deleting stuff in the middle here we have to be careful;
      k := t_unsorted.first;
      v_min_value := null;

      while k < t_unsorted.last loop

         if v_min_value is null then 
            v_min_value := t_unsorted(k);
            v_min_index := k;
         elsif t_unsorted(k) < v_min_value then
            v_min_value := t_unsorted(k);
            v_min_index := k;
         end if;

         k := t_unsorted.next;

      end loop;

      -- Now we-ve found the next minimum value put it into the 
      -- t_sorted array
      x := x + 1;          
      t_sorted(x) := v_min_value;
      -- and delete our min value from the unsorted array.
      t_unsorted.delete(v_min_index);

   end loop;


   -- Lastly show that everything worked.
   for j in 1 .. x loop

      dbms_output.put_line( t_sorted(j) );

      -- it-s also nice to show the wider world what-s happening 
      -- but let-s not do it too often, server load etc.
      if mod(j,10) = 0 then
          dbms_application_info.set_module('finding min', 'total: ' || j );
      end if;

   end loop;

end sort;

Como você pode ver, é ridículo ... As coisas ruins incluem:

  • Fazendo isso no SQL

Na verdade, é praticamente isso, deve ser extremamente rápido.


2

Tanto a escolha da linguagem quanto o algoritmo precisam ser explicados.

Esse algoritmo é chamado de classificação lenta. Eu pretendo resolver o problema do bogosort (testar permutações aleatórias até que seja resolvido) porque, embora algoritmicamente terrivelmente ineficiente, sua implementação é muito simples e você não pode garantir sua lentidão.

Eu codifico a classificação lenta no Scheme porque o principal objetivo do Scheme é ser simples, o que torna esse um desafio maior. Uma característica interessante do Scheme é sua extensibilidade imbatível; de fato, implementações da linguagem são comumente (geralmente completamente) implementadas no próprio Esquema. Ainda melhor: tudo o que você precisa é de abstrações (lambdas) e aplicativos. Os aplicativos são avaliados na notação de prefixo:

(function arg1 arg2 ...)

... é apenas açúcar sintático para:

(apply function (list arg1 arg2 ...))

... que aplica uma função a listas de argumentos.

Para fazer um aviso desse código, preciso redefinir a função max para dividir recursivamente a lista até que ela possa se comparar. A função min também é redefinida recursivamente usando max removendo todos os máximos até que um número permaneça. Finalmente, a classificação é redefinida anexando sucessivamente os mínimos.

A classificação lenta é baseada em "multiplicar e render", em oposição a "dividir e conquistar". Ele funciona retirando recursivamente os máximos até você ficar com o mínimo, anexando o mínimo resultante de cada vez à solução e reiniciando novamente até que todos os mínimos tenham sido adicionados por sua vez. Embora totalmente ineficiente, minha implementação reutiliza os cálculos o máximo possível porque: 1) É necessário para o algoritmo 2) Você pode querer que esse tipo termine algum dia ...

(define sort
  (lambda ns
    (define max
      (lambda (ns)
        (let ([len (length ns)])
          (case len
            [(2) (receive (a b) (car+cdr ns)
                   (if (> a b) a b))]
            [(1) (car ns)]
            [else (receive (a b)
                    (split-at ns
                      (floor (/ len 2)))
                    (let ([ma (max a)]
                          [mb (max b)])
                      (if (> ma mb) ma mb)))]))))
    (define min
      (lambda (ns)
        (if (null? (cdr ns)) (car ns)
            (min (remove ns (max ns))))))
    (if (every number? ns)
        (let sort ([ns ns] [sorted (list)])
          (if (null? ns) sorted
              (let ([m (min ns)])
                (sort (remove ns m)
                  (append ns m)))))
    (error "These are not all numbers: " ns))))

1

Bagunça / peso exagerados em Java

Foi divertido! Parece estranho postar algo assim.

import java.util.LinkedList;

public class WTF {

    // XXX We all know linkedlists are awesome for random access!
    public static LinkedList<Integer> sort(LinkedList<Integer> array) {
        // XXX Instead of sorting in place, we create another array entirely!
        LinkedList<Integer> result = new LinkedList<Integer>();

        // while array is not all null
        // XXX No comments!
        boolean arrayAllNull = true;
        for (int a = 0; a < array.size(); a = a + 1) {
            if (array.get(a) != null) {
                arrayAllNull = false;
            }
        }

        while (arrayAllNull != true) {

            // XXX We could use Integer.MAX_VALUE, but lets assumes something instead
            Integer i = 999999999;
            // find lowest
            for (int a = 0; a < array.size(); a = a + 1) {
                if (array.get(a) != null) {
                    if (array.get(a) < i) {
                        i = array.get(a);
                    }
                }
            }

            // replace lowest by null
            // XXX Yup, another loop! :)
            // XXX We're breaking the original array, but don't tell anyone.
            for (int a = 0; a < array.size(); a = a + 1) {
                if (array.get(a) != null) {
                    if (array.get(a) == i) {
                        array.set(a, null);
                    }
                }
            }

            result.add(i);

            // XXX Lets repeat that test once again, functions are bad.
            arrayAllNull = true;
            for (int a = 0; a < array.size(); a = a + 1) {
                if (array.get(a) != null) {
                    arrayAllNull = false;
                }
            }

        }

        return result;
    }

    public static void main(String[] args) {
        int[] numbers = new int[]{1, 4, 7, 2, 5};
        LinkedList<Integer> nums = new LinkedList<Integer>();
        for (int i : numbers)
            nums.add(i);
        System.out.println(sort(nums));
    }

}

1

Python

Só funciona se todos os itens forem inferiores a 9e99 :)

>>> L=[10,9,8,7,6,5,4,3,2,1]
>>> 
>>> print [[min(L),L.__setitem__(L.index(min(L)),9e99)][0] for i in L]
[1, 2, 3, 4, 5, 6, 7, 8, 9, 10]

Cada vez que percorrer o loop, extraia o menor elemento e substitua-o por 9e99


1

Python (634)

Se a lista estiver classificada, imprima-a. Caso contrário, troque dois elementos que estão na ordem errada e gere um script python que lida com a nova ordem. Depois de executar isso, exclua o script criado.

list_to_sort = input()
n = 0
n += 1
import sys, os
for i in range(len(list_to_sort)-1):
    if list_to_sort[i]>list_to_sort[i+1]:
        (list_to_sort[i],list_to_sort[i+1]) = (list_to_sort[i+1],list_to_sort[i])
        source_file = open(sys.argv[0],'r')
        temp_filename = 'temp'+repr(n)+'.py'
        temp_file = open(temp_filename,'w')
        temp_file.write('list_to_sort = ' + repr(list_to_sort) + '\n')
        temp_file.write('n = ' + repr(n) + '\n')
        for line in source_file.readlines()[2:]:
            temp_file.write(line)
        source_file.close()
        temp_file.close()
        os.system('python ' + temp_filename)
        os.remove(temp_filename)
        sys.exit(0)
print list_to_sort

1

Bogobogosort em Python

import random
import copy

def isSorted(list):
    newlist = copy.deepcopy(list)
    while True:
        newlist[:len(newlist)-1] = bogobogosort(newlist[:len(newlist)-1])
        if newlist[len(newlist)-2] < newlist[len(newlist)-1]:
            break
        random.shuffle(newlist)
    return newlist == list

def bogobogosort(list):
    ret = copy.deepcopy(list)
    if (len(ret) > 1):
        while not isSorted(ret):
            random.shuffle(ret)
    return ret

Algoritmo inventado por David Morgan-Mar.

Aviso: não tente fazer isso com nenhuma lista maior que 5 elementos. Até 5 é muito lento.


1

Python

Minha solução Inclui tratamento de erros e um recurso que preserva o espaço em branco ao classificar números, ou seja, o espaço em branco permanece no lugar; números se movem.

por exemplo,

Please tell me your favorite list of numbers.
I'll sort them for you.  
7, 8, 6, 7, 1, 3, 5
1, 3, 5, 6, 7, 7, 8

9,  6  ,8, 43, 90, 13   , 54, 3223, 4
4,  6  ,8, 9, 13, 43   , 54, 90, 3223

Código:

#!/usr/bin/env python
import sys
import re

class SillyUserException(ValueError):
    def __init__(self, reason, input):
        self.reason = reason
        self.input = input

    def __str__(self):
        return '''
"No man is exempt from saying silly things; the mischief is to say them deliberately."
 - Michel de Montaigne, The Complete Essays
 Your offense was {}.  You should know that it's {}.
         '''.format(self.input, self.reason)

class Item(object):
    def __init__(self, number, prespace, postspace):
        self.number = number
        self.prespace = prespace
        self.postspace = postspace

    def __str__(self):
        return self.prespace + str(self.number) + self.postspace

class ListOfNumbers(object):
    def __init__(self, string):
        self.array = self.parse(string)

    def __str__(self):
        outs = ''
        for i in self.array:
            outs += '{}{}{},'.format(i.prespace, i.number, i.postspace)
        return outs[:-1]

    def parse(self, string):
        array = []

        for item in string.split(','):
            try:
                x = int(item)
            except ValueError:
                raise SillyUserException("not a number", item)

            whitespace = re.findall("\s+", item)
            pre = ''
            post = ''
            if len(whitespace) > 0:
                pre = whitespace[0]
            if len(whitespace) > 1:
                post = whitespace[-1]

            array.append(Item(x, pre, post))

        def swap(i, j):
            tmp = array[i].number
            array[i].number = array[j].number
            array[j].number = tmp

        def min(arr, offset):
            m = arr[0]
            index = 0
            for i, e in enumerate(arr):
                if e.number < m.number:
                    m = e
                    index = i
            return index + offset


        for i, x in enumerate(array):
            m = min(array[i:], i)
            if m != i:
                swap(m, i)

        return array


if __name__ == "__main__":
    sys.stdout.writelines('\n'.join([
        "Please tell me your favorite list of numbers.",
        "I'll sort them for you.  ",
        ""
    ]))

    sys.stdout.flush()

    def read_lines():
        while True:
            line = raw_input()
            yield line

    try:
        for line in read_lines():
            if not line:
                raise SillyUserException('polite to speak when asked a question.', "<nothing>")
            if line.strip() == '42':
                raise SillyUserException('the answer to life, the universe, and everything',
                    'using and overly powerful value')
            if ',' not in line:
                raise SillyUserException("not a list", line)


            print ListOfNumbers(line)

    except SillyUserException as sillyness:
        print sillyness

1

Python 3

Este programa aceita uma lista de números separados por espaço na entrada padrão. Em seguida, imprimirá a saída padrão na ordem correta. Eventualmente.

import base64, pickle
pickle.loads(base64.b64decode(b'gAIoY2J1aWx0aW5zCmxpc3QKcQBjYnVpbHRpbnMKbWFwCnEBY2J1aWx0aW5zCmludApjYnVpbHRpbnMKZ2V0YXR0cgpxAmNidWlsdGlucwppbnB1dAopUlgFAAAAc3BsaXSGUilShlKFUnEDaABoAWNmdW5jdG9vbHMKcGFydGlhbApxBGNvcGVyYXRvcgphZGQKY19vcGVyYXRvcgpuZWcKY2J1aWx0aW5zCm1pbgpoA4VShVKGUmgDhlKFUnEFaABoAWgCY2FzeW5jaW8KZ2V0X2V2ZW50X2xvb3AKcQYpUlgKAAAAY2FsbF9sYXRlcoZSaAVoAWgEaARjYnVpbHRpbnMKcHJpbnQKhlJoA4ZSh1KFUjFoAmgGKVJYEgAAAHJ1bl91bnRpbF9jb21wbGV0ZYZSY2FzeW5jaW8Kc2xlZXAKY19vcGVyYXRvcgphZGQKY2J1aWx0aW5zCm1heApoBYVSSwGGUoVShVIu'))

Explicação: o protocolo pickle realmente oferece muita liberdade, principalmente a liberdade de importar e chamar objetos arbitrários com argumentos. A limitação mais importante é que a pickle VM não possui nenhum tipo de controle de fluxo; portanto, qualquer código implementado puramente na pickle VM deve usar o controle de fluxo nas funções da biblioteca padrão da python para obter efeitos semelhantes. Essa implementação de classificação usa um dorminhoco baseado em corotina, construído por aplicativos liberais de iteradores e aplicativos parciais.

O código python equivalente seria algo como isto:

from asyncio import get_event_loop, sleep
from operator import add
from functools import partial
values = list(map(int, input().split()))
times = list(map(partial(add, -min(values)), values))
list(map(get_event_loop().call_later, times, map(partial(partial, print), values)))
get_event_loop().run_until_complete(sleep(max(times)+1))
Ao utilizar nosso site, você reconhece que leu e compreendeu nossa Política de Cookies e nossa Política de Privacidade.
Licensed under cc by-sa 3.0 with attribution required.