Precisa de ajuda para montar o dispositivo: mount -t ntfs-3g mount falhou: não existe esse dispositivo


2

Estou usando o ophcrack-vista-livecd-3.4.0.iso no Windows 7 para recuperar uma senha. Quando tentei usar o software, recebi uma mensagem dizendo " Tables Found" juntamente com outra mensagem dizendo " No partition containing hashes found".

Em root (su: password é 'root'), aqui está o que eu tentei até agora, juntamente com os resultados ...

> Fdisk -l
Disk /dev/sda: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track/ 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device    Boot   Start      End     Blocks       Id     System
/dev/sda1          1         5      40131        de     Unknown
Partition 1 does not end on cylinder boundary
/dev/sda2   *      6       1735     13891584     7      HPFS/NTFS
/dev/sda3        1735      182402   1451210752   7      HPFS/NTFS

Disk /dev/sbd: 750.1 GB, 750153674016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sbd doesn't contain a valid partition table

Eu assumi que a partição que operava no Windows que precisava ser montada era /dev/sda2o que eu tentei a seguir ...

> mknod /dev/sda2 b 22 1
mknode: /dev/sda2: File exists
> mkdir /media/ntfs
> mount /dev/sda2 /media/ntfs
mount: mounting /dev/sda2 on /media/ntfs failed: Invalid argument
> mount -o force -t ntfs-3g /dev/sda2 /media/ntfs
mount: mounting /dev/sda2 on /media/ntfs failed: No such device

Eu tentei a mesma coisa usando /dev/sda3e dev/sbdapenas no caso e obtive os mesmos resultados. O único dispositivo que está montado corretamente é o dev/sda1que está montado media/sda1.

Alguém sabe o que eu preciso fazer para montar corretamente dev/sda2para que o Ophcrack funcione?

editar

>dmesg
    ata5: SATA max UDMA/133 abar m2048@0xf9301000 port 0xf9301300 irq 19
ata6: DUMMY
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxkqualcomm.com>
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
windbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/drivers.html
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd: 0000:00:1a.0: setting latency timer to 64
ehci_hcd: 0000:00:1a.0: EHCI Host Controller
ehci_hcd: 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd: 0000:00:1a.0: debug port 2
ehci_hcd: 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd: 0000:00:1a.0: irq 16, io mem 0xf9303000
ehci_hcd: 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd: 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd: 0000:00:1d.0: setting latency timer to 64
ehci_hcd: 0000:00:1d.0:EHCI Host Controller
ehci_hcd: 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd: 0000:00:1d.0: debug port 2
ehci_hcd: 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd: 0000:00:1d.0: irq 23, io mem 0xf9302000
ehci_hcd: 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KDB port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input0
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI No-Shortcut mode
ata5: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: PLDS BD-RE DH-8B2SH, SD11, max UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 2.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/100
ata3.00: ATAI: PLDS DVD+/-RW DH-16ABS, PD11, max UDMA/100
ata1.00: ATA-8: ST3750528AS, CC46, max UDMA/133
ata1.00: 14615149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: ATA-8: ST3750528AS, CC46, max UDMA/133
ata2.00: 14615149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA     ST3750528AS     CC46 PQ: 0 ANSI: 5
sd 0:0:0:0: [**sda**] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Direct-Access     ATA     ST3750528AS     CC46 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:0:0: [sdb] Write Protocol is off
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [**sda**] Write protocol is off
sd 0:0:0:0: [**sda**] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [**sda**] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0 CD-ROM        PLDS      DVD+-RW DH-16ABS PD11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
scsi 3:0:0:0 CD-ROM        PLDS      DVD+-RE DH-8B2SH SD11 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 47x/94x writer dvd-ram cd/rw xa/form2 cdda tray
sr 3:0:0:0: Attached scsi CD-ROM sr1
sr 3:0:0:0: Attached scsi generic sg3 type 5
 sdb: unknown partition table
 sda: sda1 sda2 sda3
sda: p3 size 2902421504 extends beyond EOD,
sd 1:0:0:0: [sdb] Attached SCSI disk
enabling native capacity
 sda: sda1 sda2 sda3
sda: p3 size 2902421504 extends beyond EOD, truncated
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unsused kernel memory: 408k freed
usb1-1: new high speed USB device using ehci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
Linux agpart interface v0.103
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
HDA Intel 000:01:00.1: setting latency timer to 64
usb 1-1.4: new full speed USB device using ehci_hcd and address 3
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
generic usb 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input2
generic usb 0003:046D:C52B.0002: input,hiddev0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input1
generic usb 0003:046D:C52B.0003: hiddev0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.4/input2
usb 2-1.2: new high speed USB device using ehci_hcd and address 3
xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
xhci_hcd 0000:03:00.0: setting latency timer to 64
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
scsi6 : usb-storage 2-1.2:1.3
xhci_hcd 0000:03:00.0: irq 17, io mem 0xfb300000
xhci_hcd 0000:03:00.0: Failed to enable MSI-X
xhci_hcd 0000:03:00.0: failed to allocate MSI entry
usb usb3: No Superspeed endpoint companion for config 1 interface 0 altsetting
0ep 129: using minimum values
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usblp0: USB Bidirectional printer dev 3 if alt 0 proto 2 vid 0x03FO pid 0x7511
usbcore: registered new interface driver usblp
tg3.c:v3.115 (October 14, 2010)
tg3 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
tg3 0000:04:00.0: setting latency timer to 64
tg3 mdio bus: probed
tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address d4:be:d9:8c:b5:ae
tg3 0000:04:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_add r=400:01)
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl [76180000] dma_mask[64-bit]
SB-SFI 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
SB-SFI 0000:05:00.0: setting latency timer to 64
usb 2-1.4: new low speed USB device using ehci_hcd and address 4
input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
generic-usb 0003:04CA:0027.0004: input: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:1d.0-1.4/input0
input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input4
generic-usb 0003:04CA:0027.0005: input,hiddev0: USB HID v1.10 Device [Lite-One Technology Corp. USB Multimedia Keyboard] on usb-0000:00:1d.0-1.4/input1
usb 2-1.8: new high speed USB device using ehci_hcd and address 5
scsi7 : usb-storage 2-1.8:1.0
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
scsi 6:0:0:0: Direct-Access    HP     Photosmart C4700 1.00 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdc] Attached SCSI removable disk
tg3 0000:04:00.0: eth0: Link is down
scsi 7:0:0:0: Direct-Access    Generic- SD/MMC        1.00 PQ: ANSI: 0
sd 7:0:0:0: Attached scsi generic sg5 type 0
sd 7:0:0:0: [sdd] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A

Editar 2 Aqui estão os novos comandos que tentei e seus resultados.

>file -s /dev/sda2
sh: file: not found

>cat /proc/filesystems | grep fuse
nodev    fuse
         fuseblk
nodev    fusectl

>strace mount.ntfs-3g
sh: strace: not found

Execute dmesgapós o No such deviceerro para obter mais informações.
31712 Alan Curry

As mensagens mais recentes estão no final, então trabalhar para trás a partir de lá à procura de qualquer sinal de NTFS ou sda2
Alan Curry

Obrigado. Estou editando minha postagem para mostrar tudo. Vou tentar destacar as partes sda.
Rockman

Bem, isso não foi muito útil. Aqui estão alguns mais comandos para tentar recolher mais informações de diagnóstico: file -s /dev/sda2e cat /proc/filesystems | grep fuseestrace mount.ntfs-3g /dev/sda2 /media/ntfs
Alan Curry

Eu apenas tentei todos os comandos e postei os resultados.
Rockman
Ao utilizar nosso site, você reconhece que leu e compreendeu nossa Política de Cookies e nossa Política de Privacidade.
Licensed under cc by-sa 3.0 with attribution required.